www.s-sim.com - 1.2.EL TEL MAKİNALARI SATIŞI wire machineries & welding wire machineries

Tel temizleme sistemleri (mechanical descaling systems)

Anasayfa

1.-2. EL TEL MAKİNALARI SATIŞI (1. and 2. hand wire machines)

1.2.EL TEL MAKİNALARI SATIŞI wire machineries & welding wire machineries

wire drawing Technologies

welding wire machineries

SULU TEL ÇEKME MAKİNASI (wet wire drawing machine) دستگاه مفتول کشی آلة سحب الأسلاك

AYRINTILAR , MAKİNALARI BÜYÜK VE BENZERSİZ YAPAR

HIZ 20M/SANİYE 3 ŞAFTLI 10 ADET DÖNER HADDE TEL GİRİŞ ÇAPI 1.8 MM TEL ÇIKIŞ ÇAPI 0.8 MM

SİSTEM ELEMANLARI :ÇÖZÜCÜ, SULU ÇEKME, ASİT TEMİZLEME, BAKIR
KAPLAMA, YIKAMA – KURUTMA , SKİN PASS VE SARICI .
KULLANIM ALANI :GAZ ALTI KAYNAK TELİ ,DÜŞÜK VE YÜKSEK KARBONLU ÇELİK TELLER
TEL ÇIKIŞ ÇAPI : 0.6-1.6 mm.
MAX. HIZ : 20 m/s
HADDE : 10 ADET DÖNER SİSTEM
MOTOR : 85 KW.

3 ŞAFTLI

DRAWING ,COPPERING, SHAVING,CLEANING

Details make machines great and unique

WET DRAWING MACHINE

FEATURES AND PERFORMANCES

• Max. inlet wire diameter: 2.20 mm

• Min. outlet wire diameter: 0.60 mm• Number of steps: 9

• Pre-setting for dry die (10)

• Max. speed: 20 m/s

• Section reduction per step: 15%

• Submerged cones wiredrawing system with 3horizontal shafts standard-coated with tungstencarbide

• Fully rotating die system

• Belt transmission

• Standard 85 kW motor

• Drawing bobbin with ceramic coating

• Compensator built in the machine frame

• Lubrication/cooling fluid circulation by pump and tube nest heat exchanger

Sample Image

sulu tel çekme makinası ( wet wire drawing machine )

)

KURU TEL ÇEKME MAKİNASI KURU TEL ÇEKME MAKİNESİ ( dry drawing machine )

Sample Image

Dry wire drawing machine is used for the drawing process of low carbon and high carbon wires . Upon the request of the customers , it can be designed for different inlet and outlet diameters of the wires.
Speed of the machine     : Max. 20 m/sec.
Brake system                  : pneumatic
Max. reduction                : 30
Inverter and sensor speed controlled.
Wire drawing blocks are coated tungusten carbide or ceramic
Wire drawing blocks are air and water cooled.
Rotating dies are water cooled.
Dancer installed for synchroniza

TEL ÇÖZÜCÜ (motorized wire decoiler) pay-off

TEL ÇAPI 3-6 MM MAX YÜK 1500 KG

wire diameter 3-6 mm

makina video (motorized wire decoiler)

http://video.yahoo.com/watch/2040771/6452992?v=2040771

TEL ÇÖZÜCÜ (motorized wire decoiler) pay-off

TEL ÇAPI 8-10 mm KAPASİTE 1500 KG

wire diameter 8-10 mm

Sample Image

TEL FIRÇALAMA MAKİNASI

ASİT İLE TEMİZLİĞE SON! DOĞA DOSTU MAKİNA

''KYOTO PROTOKOLÜNE UYGUN TEL TEMİZLİĞİ'' ACID FREE '

makina video

www.video.yahoo.com/video/play?vid=1687981

AUTOMATİC BRUSH-DESCALING MACHINE

WIRE DIAMETER : MİN. 4 MM - MAX. 10 M
WIRE SPEED : MAX 5 M/SN
BRUSH DIAMETER : 400×6 ADET
MOTOR : 2. 2 KV × 6 ADET
VOLTAGE : 380 V
FREQUENCY : 50 HZ.
AIR PRESSURE : 5-7 BAR
TEL ZIMPARALAMA MAKİNASI
% 100 garantili tufal temizliği

ASİT İLE TEMİZLİĞE SON! DOĞA DOSTU MAKİNA

''KYOTO PROTOKOLÜNE UYGUN TEL TEMİZLİĞİ' ACID FREE'

Twin sanding head grinding system for wire mechanical descaling

zımparalama video

http://video.yahoo.com/watch/2057960/6492480?v=2057960

WIRE GRINDING & POLISHING MACHINE

VOLTAGE : 400 V 50 Hz
MAX. INSTALLED ELECTRICAL POWER : 22 kW
WEIGHT : 2500 kg.
DIMENSIONS L/W/H : 2000/1300/1550 mm
WIRE DIAMETER : Ø 5,5-7,0 mm
PNEUMATİC PRESSURE : MAX. 6 BAR
WIRE DIRECTION : ADJUSTABLE

Sample Image

HADDE AÇI VERME MAKİNASI tel parlatma makinası

drawnplates grindig die machine

2 or 4 needles drawn plates grinding machine
continuosly adjustables RPM
silent mowement
range of diameter 0.2-10 mm
centers tubes RPM min 200 - max 1050
dies spindles RPM min 80 - max 420

makina video (hadde açı verme makinası)

http://video.yahoo.com/watch/2708711/7895553

TEL DOĞRULTMA SİSTEMLERİ

•TOPLAM 18 RULMANLI YATAY VE DİKEY RULMAN GRUPLU

•TEL ÇAPI:0.8mm DEN 2.mm YE KADAR

•RULMANLAR V ÖZEL KANAL

Sample Image